Kontakt DE
 
  BACK       FORWARD  
6.1 MOUNTINGBRACKET LUCI L20 / LUCI X
 

  Productsearch:  


Click to see a larger image
(Illustration similar) 		 

6.1.2 TRALUCI_CE – “Mounting bracket for LUCI L20 / LUCI X wall-mount” EN
Product description
  • Mounting bracket  as an accessory to the luminance meters LUCI L20 or LUCI X
  • Meets all requirements in harsh tunnel environments
  • Made of stainless steel mat. No.: 1.4571
  • Meets requirement class I acc. to German ZTV-Ing. Teil 5, Abschnitt 4
  • Specially designed for wall mounting
Your Advantages
  • High quality workmanship
  • Original accessory for the luminance meter
  • With mounting bracket luminance meter is ready for mounting
  • Incl. design calculation check

Technical specifications
Physical properties
Material Stainless steel (mat. No.: 1.4571), material thickness 2.5 mm
Requirement class I according to German ZTV-Ing. Teil 5, Abschnitt 4
Dimensions Flange plate B × H = 200 × 200 mm
Bracket L = 352.5 mm
Flanschbohrungen 4 x Ø12 mm
Hole pattern: Square 150 x 150 mm, centred
Weight Appr. 4,0 kg
Mounting position Horizontal (wall mounting)
IMPORTANT NOTE:
Allow clearance above the sensor > 250 mm!
Allow clearance behind the sensor > 500 mm!
 
To the Flyer: (click)
To the Instructions: (click)
Click to see a larger image
(Illustration similar) 		 

6.1.4 TRALUCI_EM – “Mounting bracket for LUCI L20 / LUCI X pole-mounting” EN
Product description
  • Mounting bracket  as an accessory to the luminance meters LUCI L20 or LUCI X
  • Meets all requirements in harsh tunnel environments
  • Made of stainless steel mat. No.: 1.4571
  • Meets requirement class I acc. to German ZTV-Ing. Teil 5, Abschnitt 4
  • Specially designed for wall mounting
  • Consisting of mounting bracket and 2 mounting clamps Ø 80 mm (standard)
  • Custom-made: Mounting clamps for poles with diameters up to 140 mm available
Your Advantages
  • High quality workmanship
  • Original accessory for the luminance meter
  • With mounting bracket and clamps luminance meter is ready for pole-mounting
  • Incl. design calculation check

Technical specifications
Physical properties
Material Stainless steel (mat. No.: 1.4571),
material thickness 2.5 mm (mounting bracket) / 5 mm (mounting clamps)
Requirement class I according to German ZTV-Ing. Teil 5, Abschnitt 4
Dimensions Flange plate B × H = 200 × 180 mm
Bracket L = min. 380 mm (depending on pole thickness)
Clamp Øinternal = 80 – 140 mm
Flanschbohrungen 4 x Ø10 mm, long hole L = 60 mm (for mounting clamps Ø80 – 140 mm)
Weight Appr. 5,0 kg
Mounting position Horizontal (pole mounting)
IMPORTANT NOTE:
Allow clearance above the sensor > 250 mm!
Allow clearance behind the sensor > 500 mm!
 
To the Flyer: (click)
To the Instructions: (click)
 1 to 2 out of 2  [ <<  1  >> ]